First check for standard operation below and make sure Graphic card is good working and PCIE slot is good:

Using Titan X Hybrid Graphics card as Secondary output:

1. Check in the OS to see if device is detected using onboard VGA as primary first

2. if it does not get detected in OS, please check PCIE slots and power cables

3. if PCIE slot is correct and power cables are good, then reflash the BIOS with JPME1, JPME2 set to pin 2-3. After BIOS flash finished, change back to pin 1-2 for normal operations.

Using Titan X Hybrid Graphics card as Primary output (onboard VGA disabled):

1. change BIOS VGA priority to off-board and change JPG1 jumper to pin 2-3

2. power on system, it should output few quick beeps before starting Video output.

3. if it does not get video output, please check PCIE slots and power cables

4. if PCIE slot is correct and power cables are good, then reflash the BIOS with JPME1, JPME2 set to pin 2-3. After BIOS flash finished, change back to pin 1-2 for normal operations.


Using Titan X Hybrid Graphics card as Primary output (onboard VGA enabled):

1. change BIOS VGA priority to off-board

2. power on system, it should output few quick beeps before starting Video output.

3. if you check onboard VGA output it should be at post code 91 or code 19

4. if non of step 3 and 4 work, please check PCIE slots and power cables

5. if PCIE slot is correct and power cables are good, then reflash the BIOS with JPME1, JPME2 set to pin 2-3. After BIOS flash finished, change back to pin 1-2 for normal operations.