SuperServer F618R2-RC1PT+

  Products  Systems   FatTwin™   [ F618R2-RC1PT+ ]




Integrated Board
Super X10DRFR-NT


Views: | Angled (node) | Top (node) |
| Angled Front (system) | Rear (system) |

 Key Features
8 Hot-plug System Nodes in 4U
Each node supports:

1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v4†/ v3 family; QPI up to 9.6GT/s
2. Up to 2TB† ECC 3DS LRDIMM , up to
    DDR4- 2400†MHz ; 16x DIMM slots
3. Expansion slots: 1 PCI-E 3.0 x16 (LP)
    1 PCI-E 3.0 x8 (Micro Low Profile)
4. I/O ports: 2 10GBase-T ports, 1 VGA,
    2 USB 3.0 ports
5. Built-in Server management tool
    (IPMI 2.0, KVM/media over LAN) with
    dedicated LAN port
6. 6x 2.5" Hot-swap SAS/SATA via Broadcom
    3108 or 4x 2.5" Hot-swap SAS/SATA
    + 2x optional NVMe
7. 3x heavy duty internal fans
8. 2000W High efficiency (96%)
    Redundant PSU; Titanium Level


 Drivers & Utilities   BIOS   IPMI   Tested Memory  Tested M.2 List   NVMe Options   Manuals    OS Certification Matrix    Quick-References Guide  Drive Options   Network Card (AOC) Matrix

Product SKUs
SYS-F618R2-RC1PT+
  • SuperServer F618R2-RC1PT+ (Black)
 
Motherboard

Super X10DRFR-NT
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 22 Cores† / Up to 55MB† Cache
System Bus
  • QPI up to 9.6 GT/s
Note † BIOS version 2.0 or above is required
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 
System Memory
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 2TB† ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type
  • 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
  • 3DS LRDIMM: 128GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
 
On-Board Devices
Chipset
  • Intel® C612 chipset
SAS
  • Broadcom 3108 SAS3 (12Gbps) controller;
    HW RAID 0, 1, 5, 6, 10, 50
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
 
Input / Output (per node)
SAS
  • 6 SAS3 (12Gbps) ports
NVMe
  • 2 Internal NVMe ports (PCI-E 3.0 x4)
    Note: NVMe support requires 2 CPUs installed
LAN
  • 2 RJ45 10GBase-T LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports
VGA
  • 1 VGA port
 
Management
Software
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 4U Rackmount
Model
  • CSE-F418BC-R2K04BP
 
Dimensions and Weight
Width
  • 17.63" (448mm)
Height
  • 6.96" (177mm)
Depth
  • 29" (737mm)
Package
  • 28.3" (W) x 15.0" (H) x 42.4" (D)
Weight
  • Net Weight: 150 lbs (68.04 kg)
  • Gross Weight: 200 lbs (90.71 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2 Network activity LEDs
  • Information LED (UID, Fan failure, Overheat)
 
Expansion Slots (per node)
PCI-Express
 
Drive Bays (per node)
Hot-swap
  • 6x 2.5" Hot-swap SAS/SATA drives
    Optional NVMe support

    Note: NVMe support requires 2 CPUs installed
 
Backplane
1x SAS/SATA backplane
 
System Cooling (per node)
Fans
  • 3x 4cm 14k RPM middle fans
 
Power Supply (76mm Width)
2000W Redundant Power Supplies with PMBus
Total Output Power
  • 1000W: 100 – 127Vac
  • 1800W: 200 – 220Vac
  • 1980W: 220 – 230Vac
  • 2000W: 230 – 240Vac
  • 2000W: 200 – 240Vdc (UL/cUL only)
Dimension
(W x H x L)
  • 76 x 40 x 336 mm
Input
  • 1000W: 100-127 Vac / 12-9.5 A / 50-60 Hz
  • 1800W: 200-220 Vac / 10-9.5 A / 50-60 Hz
  • 1980W: 220-230 Vac / 10-9.8 A / 50-60 Hz
  • 2000W: 230-240 Vac / 10-9.8 A / 50-60 Hz
  • 2000W: 200-240 Vac / 11.8-9.8 A / 50-60 Hz (UL/cUL only)
+12V
  • Max: 83.3A / Min: 0A (100-127 Vac)
  • Max: 150A / Min: 0A (200-220 Vac)
  • Max: 165A / Min: 0A (220-230 Vac)
  • Max: 166.7A / Min: 0A (230-240 Vac)
  • Max: 166.7A / Min: 0A (200-240 Vac)
    (UL/cUL only)
+5Vsb
  • Max: 1A / Min: 0A
Output Type
  • 27 Pairs Gold Finger Connector
Certification Titanium Level96%  Titanium Level
  [ Test Report ]
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
See Parts List
Parts List - (Items Included)
 
 Part Number
 Qty
 Description
Motherboard / Chassis MBD-X10DRFR-NT
CSE-F418BC-R2K04BP		 8
1		 Super X10DRFR-NT Motherboard
4U Chassis
Backplane BPN-ADP-8S3108-1UF 8 Avago (LSI) 3108 adapter card for X10 FatTwin Rear I/O motherboards. Adapter card includes TFM module port and x8 SAS3 ports via x2 Mini-SAS HD connectors,HF,RoHS/REACH
Backplane BPN-ADP-F418LS 8 Power Distribution Board for X10DRFR,RoHS/REACH,PBF
Backplane BPN-SAS3-F418-B6N2 8 6-port Fat Twin SAS3 12Gbps hybrid backplane, support up to 4x 2.5-inch SAS3/SATA3 HDD/SSD and 2x NVMe/SAS3/SATA3 storage devices
Cable 1 CBL-0486L 16 2x2 to 2x2 15cm power cable HF. 18AWG
Cable 2 CBL-OTHR-0022L 8 20 to 20 pin cable for BPN-ADP-F418LS,7.5cm, 28AWG,RoHS/REACH,PBF
Cable 3 CBL-PWCD-0578 4 PWCD,US,IEC60320 C14 TO C13,3FT,14AWG
Cable 4 CBL-SAST-0697 16 MINI SAS HD,12G,INT,6CM,30AWG
Manual MNL-1761-QRG 1 Quick Reference Guide for F618R2-RC1+/RC1PT+
Riser Card RSC-R1UF-E16R 8 RSC-R1UF-E16R
Heatsink / Retention SNK-P0047PSM 8 1U Passive Front CPU Heat Sink w/ a Middle Air Channel for X9, X10 2U Twin^2+ and Twin Pro^2 Series Servers
Heatsink / Retention SNK-P0057P 8 1U High Performance Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Square ILM MB
* Power Supply PWS-2K04A-1R 4 AC-DC 2000W, Titanium Level, Redundancy, 1U, PMBus 1.2, +12V/+5Vsb, 360x76x40mm,HF,RoHS/REACH
* Backplane BPN-PDB-F418 2 Fat Twin Mid-plane; support 2x PS; 4x MB hot-swap & over-current connection; Front panel connection and 4X PWM fan control
* Rail Set MCP-290-41803-0N 1 Fat twin F418 / F424 Static Rail set support 28-33.5 inch depth rail,RoHS/REACH,PBF
Notes:
  1. Parts with * are inside the chassis
  2. Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.


Optional Parts List
  Part Number Qty Description
CacheVault Kit BTR-CV3108-FT1 1/node CacheVault kit for FatTwin Broadcom 3108 card. Includes: TFM, cables, brackets and supercap
NVMe Cable CBL-SAST-0698 2/node 10cm NVMe cable; RA-RA
Software SFT-OOB-LIC • 8 OOB Management Package (per node license)
Software SFT-DCMS-Single 8 DataCenter Management Package (per node license)
Hide Parts List
Terms & Conditions   |   Privacy   |   Investor Relations   |   Jobs   |   Site Map
SuperServer® | Motherboard | Chassis | Rack Cabinet | SuperBlade® | Embedded | Networking | Storage | Accessories | AMD Solution | Power Supplies
Copyright © 2019 Super Micro Computer, Inc.   
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Certain products may not be available in your region