A3SPI-4C-HLN4F

A3SPI-4C-HLN4F
Embedded
4-Core Parker Ridge
Intel QAT
Quad 1GbE LAN
IPMI
Oculink

Key Features


  1. Supports 12V DC power input
  2. System on Chip
  3. Intel Atom Processor C5315,
    Single Socket FCBGA-2106 supported,
    CPU TDP support 38W
  4. Intel Quick Assist Technology
  5. Up to 128GB ECC RDIMM DDR4-2400MHz, in 2 DIMM slots
  6. Expansion slots:
    1 PCIe 3.0 x2 (in x8 slot)
  7. 4 GbE LAN ports
  8. Up to 5 SATA3 ports from SoC (1 via SATA port, 4 via Oculink)
  9. I/O: 1 VGA, 1 COM, TPM 2.0 onboard and header both
  10. 2 USB 3.0 (Type-A on rear)
    2 USB 2.0 (via headers)
  11. M.2 Interface:
    1x M.2 B-Key 3052 w/PCIe 3.0 & SATA3 & USB3.0
    1x M.2 M-Key 2280 w/PCIe3.0 
  12. Linux support only (RHEL 8.3 and kernel version 4.18.0 or higher)
...
...
Specifications Resources Parts List
Specifications
Product SKUs
MBD-A3SPI-4C-HLN4F
Physical Stats
Form Factor
  • Mini-ITX
Dimension
  • 6.7" x 7.1" (17.14cm x 18.03cm)
Processor
CPU
  • Intel® Atom® Processor C5315
  • Single Socket FCBGA-2106 supported, CPU TDP supports Up to 38W TDP
Core
  • Up to 4 cores / 9MB Cache
System Memory
Memory Capacity
  • 2 DIMM slots
  • Up to 128GB ECC RDIMM, DDR4-2400MT/s
Memory Type
  • 2400 MT/s ECC DDR4 RDIMM
DIMM Sizes
  • 8GB, 16GB, 32GB, 64GB
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • System on Chip
SATA
  • SoC controller for 1 SATA3 (6 Gbps) ports
IPMI
  • ASPEED AST2500 BMC
Graphics
  • 1 Aspeed AST2500 BMC port(s)
Network Controllers
  • Quad LAN with Intel® C5000 SoC, 1GbE
Input / Output
LAN
  • 4 RJ45 Gigabit Ethernet LAN ports
Serial Port
  • 1 COM
DOM
  • 1 SuperDOM (Disk on Module) ports
TPM
  • 1 TPM Header & Chip both
Others
  • 1 8-bit GPIO header
  • 1 Oculink
Expansion Slots
PCIe
  • 1 PCIe 3.0 x2 (in x8 slot)
M.2
  • M.2 Interface: 1 PCIe 3.0 x4; 1 SATA/PCIe 3.0 x2/USB 3.0
  • Form Factor: 2280, 3052
  • Key: M-Key, B-Key
System BIOS
BIOS Type
  • 32MB AMI UEFI
BIOS Features
  • UEFI 2.7
  • SMBIOS 3.0 or later
  • ACPI 6.0 or later
Management
Software
System Management Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support, SuperDoctor® 5
Power Configurations
  • ATX Power connector, +12V DC Power Input, CPU thermal trip support for processor protection, Power-on mode for AC power recovery
Security
Hardware
  • Trusted Platform Module (TPM) 2.0
Features
  • Cryptographically Signed Firmware
  • Secure Boot
  • Secure Firmware Updates
  • System Lockdown
PC Health Monitoring
Voltage
  • VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chassis intrusion header, 4 -fan status, 3.3V standby, 1.2V (VDIMM), 1.05 (PCH), +5V standby, +5V, +3.3V, +12V
LED
  • UID/remote UID LED
Temperature
  • CPU thermal trip support
FAN
  • 4x 4-pin fan headers (up to 4 fans)
  • Thermal control tachometer fan connectors, Fan speed control, Dual Cooling Zone, 4 fans with tachometer monitoring, Status monitoring for speed control, Pulse Width Modulated (PWM) fan connectors, Support 3-pin fans (w/o speed control)
Other Features
  • UID, RoHS, M.2 NGFF connector, Chassis intrusion header, ATX power connector, ACPI power management, 8-pin 12v DC power connector, 12V DC or ATX Power Source, Intel® QuickAssist Technology
Operating Environment
Operating Temperature Range
  • 0°C - 60°C (32°F - 140°F)
Non-Operating Temperature Range
  • -40°C - 85°C (-40°F - 185°F)
Operating Relative Humidity Range
  • 10% - 85% (non-condensing)
Non Operating Relative Humidity Range
  • 10% - 95% (non-condensing)
Publish Status
0
  • Published
Resources
Parts List

A3SPI-4C-HLN4F New

  1. Products
  2. Motherboards
  3. A3SPI-4C-HLN4F

Certain products may not be available in your region